Intestinal Fatty Acid Binding Protein (IFABP/FABP2) BioAssay™ ELISA Kit (Monkey)

The Intestinal Fatty Acid Binding Protein (IFABP/FABP2) BioAssay™ ELISA Kit is a quantitative sandwich assay for the detection of IFABP/FABP2 in monkey serum, plasma and other biological fluids. Cell lysates and tissue homogenates, though not tested, may potentially be used as samples.

0.156-10ng/ml

0.094ng/ml

Intra-Assay: CV<8%
Inter-Assay: CV<10%

This ELISA kit employs the sandwich enzyme-linked immunoassay technique, utilizing a microtiter plate pre-coated with an antibody specific to IFABP/FABP2. Standards and samples are added to the appropriate wells, then incubated. Aspirate and wash the plate. The Antibody (Biotin) is added to all the wells. The plate is incubated and then washed. Streptavidin (HRP) is added to each microplate well and incubated then washed. Then the TMB substrate solution is added and incubated. After the TMB substrate solution is added, only those wells that contain IFABP/FABP2, the antibody (Biotin) and Streptavidin (HRP) will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of IFABP/FABP2 in the sample is then determined by comparing the O.D. of the sample to the standard curve.

*356452A: Microtiter Strips, 1x48 wells or 1x96 wells
*356452B: Standard, 1x1 vial or 2x1 vial
356452C: Sample/Standard Dilution Buffer, 1x10ml or 1x20ml
356452D: Antibody (Biotin) (Concentrated), 1x60ul or 1x120ul
356452E: Antibody Dilution Buffer, 1x5ml or 1x10ml
356452F: Streptavidin (HRP) (SABC), 1x60ul or 1x120ul
356452G: SABC Dilution Buffer, 1x5ml or 1x10ml
356452H: TMB Substrate, 1x5ml or 1x10ml
356452J: Stop Solution, 1x5ml or 1x10ml
356452K: Wash Buffer, 25X, 1x15ml or 1x30ml

Store unopened *356452A at 4ºC; store at -20ºC once opened. Store unopened *356452B at 4°C; once reconstituted, store at 4°C for up to 12 hours or at -20°C for up to 48 hours. Store other components at 4°C. Kit is stable for 6 months after receipt. For maximum recovery of product, centrifuge the original vials after thawing and prior to removing the cap.

1. Wash plate 2 times before adding standards and samples to wells!
2. Add 100ul standard or sample to each well and incubate for 90 minutes at 37°C. Aspirate and wash 2 times.
3. Add 100ul Antibody (Biotin) working solution to each well and incubate for 60 minutes at 37°C.
4. Aspirate and wash 3 times.
5. Add 100ul SABC working solution to each well. Incubate for 30 minutes at 37°C
6. Aspirate and wash 5 times.
7. Add 90ul TMB substrate. Incubate 10-20 minutes at 37°C
8. Add 50ul Stop Solution. Read at 450nm immediately.
9. Calculate results

This product as supplied is intended for research use only, not for use in human, therapeutic or diagnostic applications without the expressed written authorization of United States Biological.