Reagentes e instrumentos para imunologia, biologia celular e biologia molecular.
 
> Go 6983 [133053-19-7]

Go 6983 [133053-19-7]

Imprimir Imprimir
Please log in

Referência HY-13689-5mg

Tamanho : 5mg

Marca : MedChemExpress


Description

Go 6983 is a pan-PKC inhibitor against for PKCα, PKCβ, PKCγ, PKCδ and PKCζ with IC50 of 7 nM, 7 nM, 6 nM, 10 nM and 60 nM, respectively.

IC50 & Target[1]

PKCγ

6 nM (IC50)

PKCα

7 nM (IC50)

PKCβ

7 nM (IC50)

PKCδ

10 nM (IC50)

PKCζ

60 nM (IC50)

PKCμ

20000 nM (IC50)

In Vitro

Go 6983 inhibits PKCμ with IC50 of 20 μM, and the pther PKC isoenzymes can be suppressed by Go 6983 with IC50 values from 7 to 60 nM[1]. Go 6983 (100 nM) significantly reduces PMN adherence to the endothelium and infiltration into the myocardium compared with I/R + PMN hearts, and significantly inhibits superoxide release from PMNs by 90 +/- 2% in rat hearts[2]. Go 6983 (200 nM) has a reduced cardioprotective effect compared with the cardioprotective Go 6983 concentrations (50 and 100 nM) despite inhibiting PMN superoxide release by 99%[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Go 6983 Related Antibodies

Solvant et solubilité
In Vitro: 

DMSO : 100 mg/mL (225.98 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.2598 mL 11.2992 mL 22.5984 mL
5 mM 0.4520 mL 2.2598 mL 4.5197 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (5.65 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: 2.5 mg/mL (5.65 mM); Suspended solution; Need ultrasonic

    This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Pureté et documentation
Références

Você também pode estar interessado nos seguintes produtos:



Referência
Descrição
Cond.
Price Bef. VAT