Immuno Fluoro Mount
Referência MBS258477-20mL
Tamanho : 20mL
Marca : MyBiosource
Immuno Fluoro Mount Reagent
For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS258477Immuno Fluoro Mount (IFM) is an aqueous non- permanent, low viscosity mounting medium for immunofluorescence. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent… More details
Product Overview
Online Datasheet in PDFProduct Name
Immuno Fluoro Mount, Reagent
Full Product Name
Immuno Fluoro Mount
Preparation and Storage
Store at 2-8 degree C. DO NOT FREEZE
Method of Analysis
Immunofluorescence, confocal microscopy
Notes
Ready to use mounting medium for Immunofluorescence
Product Categories/Family for Immuno Fluoro Mount reagent
IHC Reagents
Applications Tested/Suitable for Immuno Fluoro Mount reagent
Immunohistochemistry (IHC)
Application Notes for Immuno Fluoro Mount reagent
1. Bring the vial to room temperature.
2. Rinse slide to be mounted with DISTILLED OR DEIONIZED WATER, touch the edges of slide on a paper towel to remove excess water. Place slides on a flat surface.
3. Turn the vial upside down and open the dropper to remove any air bubbles. Apply 2-3 drops of mounting medium and apply coverslip carefully without getting air bubbles.
4. The specimen is ready for visualization under a microscope.
5. The coverslip may move, so it may be necessary to seal the edges of cover slip with nail polish, any organic medium or our Organo mounting medium .
6. Store slide at 4 degree C in the dark.
7. Method for applying Coverslip: Put 1-2 drops of Mounting medium on the specimen. After 3-4 minutes apply coverslip carefully avoiding air bubbles. Put Kimwipes on the top of coverslip, press gently to remove excess mounting medium. With 200 micropipette add organic mounting medium to seal the edges. Incubate at 37 degree C for one hour in the dark to dry organic mounting medium.
2. Rinse slide to be mounted with DISTILLED OR DEIONIZED WATER, touch the edges of slide on a paper towel to remove excess water. Place slides on a flat surface.
3. Turn the vial upside down and open the dropper to remove any air bubbles. Apply 2-3 drops of mounting medium and apply coverslip carefully without getting air bubbles.
4. The specimen is ready for visualization under a microscope.
5. The coverslip may move, so it may be necessary to seal the edges of cover slip with nail polish, any organic medium or our Organo mounting medium .
6. Store slide at 4 degree C in the dark.
7. Method for applying Coverslip: Put 1-2 drops of Mounting medium on the specimen. After 3-4 minutes apply coverslip carefully avoiding air bubbles. Put Kimwipes on the top of coverslip, press gently to remove excess mounting medium. With 200 micropipette add organic mounting medium to seal the edges. Incubate at 37 degree C for one hour in the dark to dry organic mounting medium.
Other Notes
Small volumes of Immuno Fluoro Mount reagent vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Searchable Terms for Immuno Fluoro Mount purchase
MBS258477 is a reagent targeting Immuno Fluoro Mount.