Tamanho : 50mg
Synonyms: Sphingosine Kinase 1 Inhibitor II, PF 543
| Description | PF-543 (Sphingosine Kinase 1 Inhibitor II), a novel sphingosine-competitive inhibitor of SphK1, inhibits SphK1 with IC50 of 2.0 nM and Ki of 3.6 nM. |
| Targets & IC50 | SPHK1:3.6 nM(Ki), SPHK1:2.0 nM |
| In vitro | PF543 is a cell-permeable hydroxyl methylpyrrolidine compound that inhibits SphK-1/SphK1-catalyzed sphingosine phosphorylation in a reversible and sphingosine-competitive manner, exhibiting no affinity toward S1P receptors and much reduced inhibitory activity against Sphk2 (6.8% inhibition at 10 μM) or 46 other lipid and portein kinases (IC50 >10 μM). In the SphK1-overexpression 1483 head and neck carcinoma cells, PF-543 decreases the level of endogenous S1P 10-fold with a proportional increase in the level of sphingosine. PF-543 binds SphK1 reversibly (k off t1/2=8.5 min) and with high affinity and the binding constant (Kd) is 5 nM. PF543 had no effect on the proliferation and survival of 1483, A549, LN229, Jurkat, U937 and MCF-7 cells, despite a dramatic change in the cellular S1P/sphingosine ratio. PF-543 is effective as a potent inhibitor of S1P formation in whole blood, indicating that the SphK1 isoform of sphingosine kinase is the major source of S1P in human blood. [1] |
| In vivo | Administration of the potent sphingosine kinase 1 inhibitor, PF-543 in a mouse hypoxic model of pulmonary hypertension has no effect on vascular remodelling but reduces right ventricular hypertrophy. Administration of 10 mg/kg PF-543 for 24 h to mice induces a decrease in SK1 expression in pulmonary vessels[2]. |
| Synonyms | Sphingosine Kinase 1 Inhibitor II, PF 543 |
| Kinase Assay | FITC-S1P quantification/Caliper assay: A 384-well format of the SphK enzyme assay based on separation of FITC-S1P from unreacted FITC-sphingosine substrate using a microfluidic capillary electrophoresis mobility-shift system is developed. Briefly, 3 nM SphK1–His6 is incubated with 1 μM FITC-sphingosine, 20 μM ATP and 10 μM compound (a final concentration of DMSO of 2 %) in a buffer containing 100 mM Hepes (pH 7.4), 1 mM MgCl2,0.01% Triton X-100, 10% glycerol, 100 μM sodium orthovanadate and 1 mM DTT for 1 h in a 384-well Matrical MP-101-1-PP plate. Reaction mixtures (10 μL) are quenched by the addition of 20 μL of 30 mM EDTA and 0.15% Coating Reagent-3 in 100 mM Hepes, and a small aliquot of each reaction (a few nanolitres) is analysed in the Caliper LabChip 3000 instrument under -1.5 psi (psi=6.9 kPa) pressure, a downstream voltage of -1900 V and a sip time of 0.2 s. Phosphorylated fluorescent product and unphosphorylated fluorescent substrate appeared as distinctive peaks and are quantified using the Caliper data. |
| Cell Research | CellTiter-Glo Assay (Only for Reference) |
| Molecular Weight | 465.6 |
| Formula | C27H31NO4S |
| Cas No. | 1415562-82-1 |
| Smiles | Cc1cc(CS(=O)(=O)c2ccccc2)cc(OCc2ccc(CN3CCC[C@@H]3CO)cc2)c1 |
| Relative Density. | 1.224 g/cm3 (Predicted) |
| Storage | Store at low temperature,Keep away from direct sunlight,Store under nitrogen, Pure form: -20°C for 3 years | In solvent: -80°C for 1 year Shipping with blue ice/Shipping at ambient temperature. | |||||||||||||||||||||||||||||||||||
| Solubility Information | H2O: <1 mg/mL DMSO: 93 mg/mL (199.74 mM), Sonication is recommended. Ethanol: 93 mg/mL (199.74 mM), Sonication is recommended. | |||||||||||||||||||||||||||||||||||
| In Vivo Formulation | 10% DMSO+90% Corn Oil: 5 mg/mL (10.74 mM), Sonication is recommended. Please add the solvents sequentially, clarifying the solution as much as possible before adding the next one. Dissolve by heating and/or sonication if necessary. Working solution is recommended to be prepared and used immediately. The formulation provided above is for reference purposes only. In vivo formulations may vary and should be modified based on specific experimental conditions. | |||||||||||||||||||||||||||||||||||
Solution Preparation Table | ||||||||||||||||||||||||||||||||||||
DMSO/Ethanol
Note : The dilution table applies only to solid products. For liquid products, please calculate the stock solution based on the stated concentration and/or density. | ||||||||||||||||||||||||||||||||||||
For example, if the intended dosage is 10 mg/kg for animals weighing 20 g , with a dosing volume of 100 μL per animal, and a total of 10 animals are to be administered, using a formulation of 
10% DMSO+ 40% PEG300+ 5% Tween 80+ 45% Saline/PBS/ddH2O , the resulting working solution concentration would be 2 mg/mL.Dissolve 2 mg of the compound in 100 μL DMSO to obtain a stock solution at a concentration of 20 mg/mL . If the required concentration exceeds the compound's known solubility, please contact us for technical support before proceeding.
1) Add 100 μL of the DMSO stock solution to 400 µL PEG300 and mix thoroughly until the solution becomes clear.
2) Add 50 µL Tween 80 and mix well until fully clarified.
3) Add 450 µL Saline,PBS or ddH2O and mix thoroughly until a homogeneous solution is obtained.
| Size | Quantity | Unit Price | Amount | Operation |
|---|
