Kinetin [525-79-1]

Commande minimum 2

Référence HY-N0160-5g

Conditionnement : 5g

Marque : MedChemExpress

Contactez votre distributeur local :


Téléphone : +1 850 650 7790

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (11.62 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (11.62 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
  • Protocol 3

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.5 mg/mL (11.62 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
  • [1]. Hsiao G, et al. Inhibitory activity of kinetin on free radical formation of activated platelets in vitro and on thrombus formation in vivo. Eur J Pharmacol. 2003 Apr 4;465(3):281-7.  [Content Brief]

    [2]. Hims MM, et al. Therapeutic potential and mechanism of kinetin as a treatment for the human splicing disease familial dysautonomia. J Mol Med (Berl). 2007 Feb;85(2):149-61.  [Content Brief]

    [3]. Axelrod FB, et al. Kinetin improves IKBKAP mRNA splicing in patients with familial dysautonomia. Pediatr Res. 2011 Nov;70(5):480-3.  [Content Brief]

    [4]. Griffaut B, et al. Cytotoxic effects of kinetin riboside on mouse, human and plant tumour cells. Int J Biol Macromol. 2004 Aug;34(4):271-5.  [Content Brief]

  • [1]. Hsiao G, et al. Inhibitory activity of kinetin on free radical formation of activated platelets in vitro and on thrombus formation in vivo. Eur J Pharmacol. 2003 Apr 4;465(3):281-7.

    [2]. Hims MM, et al. Therapeutic potential and mechanism of kinetin as a treatment for the human splicing disease familial dysautonomia. J Mol Med (Berl). 2007 Feb;85(2):149-61.

    [3]. Axelrod FB, et al. Kinetin improves IKBKAP mRNA splicing in patients with familial dysautonomia. Pediatr Res. 2011 Nov;70(5):480-3.

    [4]. Griffaut B, et al. Cytotoxic effects of kinetin riboside on mouse, human and plant tumour cells. Int J Biol Macromol. 2004 Aug;34(4):271-5.

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO / 1M NaOH 1 mM 4.6466 mL 23.2331 mL 46.4662 mL 116.1656 mL
5 mM 0.9293 mL 4.6466 mL 9.2932 mL 23.2331 mL
10 mM 0.4647 mL 2.3233 mL 4.6466 mL 11.6166 mL
15 mM 0.3098 mL 1.5489 mL 3.0977 mL 7.7444 mL
20 mM 0.2323 mL 1.1617 mL 2.3233 mL 5.8083 mL
25 mM 0.1859 mL 0.9293 mL 1.8586 mL 4.6466 mL
30 mM 0.1549 mL 0.7744 mL 1.5489 mL 3.8722 mL
40 mM 0.1162 mL 0.5808 mL 1.1617 mL 2.9041 mL
50 mM 0.0929 mL 0.4647 mL 0.9293 mL 2.3233 mL
60 mM 0.0774 mL 0.3872 mL 0.7744 mL 1.9361 mL
80 mM 0.0581 mL 0.2904 mL 0.5808 mL 1.4521 mL
100 mM 0.0465 mL 0.2323 mL 0.4647 mL 1.1617 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Immunology/Inflammation
  • SOD
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

Kinetin525-79-16-Furfuryladenine N6-FurfuryladenineSODSuperoxide DismutasehormonedivisionacutepulmonarythrombosisoxidationagesuperoxideplantcytokininInhibitorinhibitorinhibit

Vos produits récemment consultés:

Demande en ligne

Your information is safe with us. * Required Fields.

Bulk Inquiry

Inquiry Information

Nom du produit:
Kinetin
Cat. No.:
HY-N0160
Quantité:
MCE Japan Authorized Agent:

Vous serez peut-être également intéressé par les produits suivants :



Référence
Description
Cond.
Prix HT