Reagents and instruments for immunology, cell biology and molecular biology.
 
> Caspofungin (diacetate) [179463-17-3]

Caspofungin (diacetate) [179463-17-3]

Print Print
Please log in

Cat# HY-17006-10mg

Size : 10mg

Brand : MedChemExpress


Description

Caspofungin (MK-0991) diacetate is a potent antifungal agent. Caspofungin diacetate inhibits the synthesis of the fungal cell wall component β-(l,3)-D-glucan[1][2].

In Vivo

Caspofungin diacetate (1-8 mg/kg; i.p.; daily, for 7 days) is able to penetrate the CNS in mice and achieve concentrations that result in the reduction of Candida burden in the brain[1].
Caspofungin diacetate (0.41-41 μM; i.p.; for 5 weeks; male C57BL/6 mice) is a safe antifungal agent at vitreal concentrations of 0.41 to 4.1 μM in mice[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Animal Model: Complement component 5-deficient DBA/2N mice[1]
Dosage: 1, 2, 4 and 8 mg/kg
Administration: Intraperitoneal injection; daily, for 7 days
Result: Reduced the concentration of Candida load in the brain.
Animal Model: Male C57BL/6 mice[2]
Dosage: 0.41, 1.2, 2.5, 4.1, and 41 μM
Administration: Intraperitoneal injection; for 5 weeks
Result: Had nonsignificant alterations in their ERG waveforms from 0.41 to 4.1 μM.
Clinical Trial
Molecular Weight

1213.42

Formula

C56H96N10O19
CAS No.
Appearance

Solid

Color

White to off-white

SMILES

O=C([C@](NC([C@](NC([C@@](C[C@H]1O)(10)N(C1)C2=O)=O)(10)[C@H](O)[C@H](C(C=C3)=CC=C3O)O)=O)(10)[C@H](O)CCN)N(CC[C@@H]4O)[C@]4(10)C(N[C@@H]([C@@H](C[C@@H](C(N[C@@]2(10)[C@H](O)C)=O)NC(CCCCCCCC[C@@H](C)C[C@@H](C)CC)=O)O)NCCN)=O.OC(C)=O.OC(C)=O
Shipping

Room temperature in continental US; may vary elsewhere.
Storage

-20°C, sealed storage, away from moisture and light

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

Solvent & Solubility
In Vitro: 

DMSO : 100 mg/mL (82.41 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

H2O : 50 mg/mL (41.21 mM; Need ultrasonic)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 0.8241 mL 4.1206 mL 8.2412 mL
5 mM 0.1648 mL 0.8241 mL 1.6482 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (2.06 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (2.06 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
Purity & Documentation
References

You might also be interested by the following products:



Cat#
Description
Cond.
Price Bef. VAT
B2083-10mg
Caspofungin Acetate [179463-17-3]
 10mg