Toreforant [952494-46-1]

Cat# HY-16756-1mL

Size : 10mM/1mL

Brand : MedChemExpress


Description

Toreforant is a potent and selective histamine H4 receptor (H4R) antagonist, with a Ki at the human receptor of 8.4 nM.

IC50 & Target

H4 receptor

8.4±2.2 nM (IC50)

In Vitro

In human polymorphonuclear leukocytes, Toreforant inhibits the histamine-induced shape change of human eosinophils and produces a rightward shift in the histamine dose response curves indicating that it is acting as an antagonist of the human H4R in these primary cells. This is not an equilibrium measurement and therefore the calculation of a pA2 is complicated. The pA2 can be estimated using the shift seen the lowest concentration of antagonist. This yields a pA2 of around 7.5 consistent with the results in the transfected system. This assay can also be performed in whole blood and, as for the purified cells, Toreforant is able to inhibit the actions of histamine. The IC50 values are 296 nM and 780 nM when 100 nM and 300 nM histamine are used, respectively[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

In Vivo

The animals treated with 100 mg/kg toreforant have reduced disease severity scores. The reduction in scores is similar to JNJ 28307474. A model of histamine-induced scratching in CD-1 mice (n=5 per group) is used to judge the anti-pruritic effects of Toreforant. Unlike other H4R antagonists, Toreforant is not efficacious in reducing histamine-mediated pruritus. After oral administration to rats, Toreforant-derived radioactivity is widely distributed into tissues; however, it is not quantifiable in cerebellum, cerebrum, medulla, and spinal cord in either Long Evans or Sprague Dawley rats, suggesting that drug-derived radioactivity does not cross the blood-brain barrier. Neuropathic pain models in rats are conducted with Toreforant and an H4R antagonist that does cross the blood-brain barrier, JNJ 39758979. In a rat spinal nerve ligation model JNJ 39758979 was able to significantly attenuate the mechanical allodynia induced in the model, however Toreforant has no activity[1].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

Clinical Trial
Molecular Weight

392.54

Formula

C23H32N6

CAS No.
Appearance

Solid

Color

Off-white to light yellow

SMILES

CN1CCC(CCCNC2=NC=C(C3=NC4=CC(C)=CC(C)=C4N3)C(C)=N2)CC1

Shipping

Room temperature in continental US; may vary elsewhere.

Storage

4°C, sealed storage, away from moisture and light

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

Solvent & Solubility
In Vitro: 

DMSO : 100 mg/mL (254.75 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 2.5475 mL 12.7376 mL 25.4751 mL
5 mM 0.5095 mL 2.5475 mL 5.0950 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (6.37 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (6.37 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Purity & Documentation
References

You might also be interested by the following products:



Cat#
Description
Cond.
Price Bef. VAT
NB-64-08083-100mg
 100mg 
NB-64-08083-25mg
 25mg 
NB-64-08083-50mg
 50mg