Reactivos e instrumentos para inmunología, biología celular y biología molecular.
 
> Stearyl oleate [17673-49-3]

Stearyl oleate [17673-49-3]

Imprimir Imprimir
Por favor conéctese

Referencia HY-W127392-25mg

embalaje : 25mg

Marca : MedChemExpress


Descripciòn

Stearyl oleate is a biochemical reagent that can be used as a biological material or organic compound for life science related research.

Peso molecular

534.94

Fòrmula

C36H70O2
No. CAS
Appearance

Liquid

Color

Colorless to light yellow

SMILES

CCCCCCCC/C=C\CCCCCCCC(OCCCCCCCCCCCCCCCCCC)=O
Envío

Room temperature in continental US; may vary elsewhere.
Almacenamiento
Pure form -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
Solvente y solubilidad
In Vitro: 

DMSO : 25 mg/mL (46.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.8694 mL 9.3468 mL 18.6937 mL
5 mM 0.3739 mL 1.8694 mL 3.7387 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (4.67 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% Corn Oil

    Solubility: ≥ 2.5 mg/mL (4.67 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.
Pureza y Documentación